Melita-K. Knives for life.

Knives production and selling

Fighting

Shaitan-M

"Shaitan-M"

"Shaitan-M" is developed in 2001 under the order of Ministry of Internal Affairs Republic of Tatarstan.

"Shaitan-M" (skeletal type) is the first modification of the fighting daggers "Shaitan". It can be used as the throwing knife maintaining up to 3000 throws.

Characteristics of a knife "Shaitan-M":

  • Total length, mm - 298

  • Length of blade, mm - 180

  • The greatest width of blade, mm - 32

  • Thickness of a butt, mm - 5,7

  • Width of handle, mm - 29

  • Thickness of handle, mm - 5,7

  • Hardness of blade, HRC - 52-56

  • Material of blade, steel: 50Cr14MoVa, 70Cr16MoVaSi (patent RU236957C1).

 

Permyak

"Permyak"

“Permyak” knife was created by special order of Federal Security Service Directorate of Perm city as per drawings given by a customer. Handle is made of rubber, wood and type leather. Blade is made with antiglare treatment. Camouflage cover of blade is possible. On the basis of this knife there was created a line of knives with typical handle.

Characteristics of a knife:

  • Total length, mm - 262

  • Length of blade, mm - 150

  • The greatest width of blade, mm - 30

  • Thickness of a butt, mm - 4

  • Width of handle, mm - 30

  • Thickness of handle, mm - 23

  • Hardness of blade, HRC - 52-56

  • Material of blade: steel 50Cr14MoVa, 95Cr18, EP853.

 

NR-09

"NR-09"

“NR-09” knife is a reply of popular series of "an intelligence officer knife". Persistent interest of admirers of this knife trend stimulates creation of new models of this type of knife. Blade has a groove on one side, back of the blade has a bezel for opening cans not using cutting edge. Handle is made of molded thermoplastic elastomer.

Characteristics of a knife:

  • Total length, mm - 247

  • Length of blade, mm - 136

  • The greatest width of blade, mm - 25

  • Thickness of a butt, mm - 3,6

  • Width of handle, mm - 32

  • Thickness of handle, mm - 20

  • Hardness of blade, HRC - 52-56

  • Material of blade: steel 50Cr14MoVa, 70Cr16MoVaSi (patent RU236957C1).

 

Marine officer dirk

"Marine officer dirk"

After the end of the Great Patriotic War there was adopted a new form of dirk that is with a flat steel chrome-plated blade of rhomb-shaped section. The handle has a trigger on the right-hand side that prevents the blade from falling from the sheath. Handle of tetrahedral form is made of ivory plastic. Lower shoe, head and quillon of handle are made of non-ferrous gold plated metal.

Wood sheath is faced with black leather and lacquered. Sheath device (two shoes and tip) are made of non-ferrous gold plated metal. On the right-hand side of upper shoe there is designated an anchor, on the left-hand side – a ship. The upper and lower shoes have rings for shoulder belt.

The belt has an oval fastener of non-ferrous metal with anchor. Fasteners regulating length of shoulder belt are also made of non-ferrous metal with anchors. Belt with shoulder belt are put on over the ceremonial dress so as the dirk is on the left-hand side. Duty shift and watchman service persons (officers and midshipmen) should wear dirk over a blue uniform coat or overcoat.

Dirk as an individual weapon with lieutenant shoulder-strap is given to graduates of higher navy military schools alongside with diploma of higher educational establishment and the first officer rank awarding. Dirk is worn in sheath on shoulder belt by admirals, generals and officers of naval forces of Russia, and by midshipmen during full dress and duty shift and watchman service.

In Soviet naval forces and Russian Federation Naval Forces dirk is an accessory of ceremonial dress not only of naval officers but of admirals, generals, officers, midshipmen and warrant officers of all types of forces; however only in naval forces dirk is considered an individual officer weapon. Marine dirks and dirks of other forces are differentiated by emblems at the present time in Russia.

Characteristics of a knife:

  • Total length, mm - 237

  • Length of blade, mm - 130

  • The greatest width of blade, mm - 22

  • Thickness of a butt, mm - 5,6

  • Width of handle, mm - 32

  • Thickness of handle, mm - 20

  • Hardness of blade, HRC - 52-56

  • Material of blade: steel 50Cr14MoVa, 70Cr16MoVaSi (patent RU236957C1).

 

Kayman

"Kayman"

“Kayman” knife is a modification of officer knife “Vityaz HCH” with a rubber, more ergonomic handle suitable for working ‘with reverse grip’. Cutting edge has a crescent cavity that allows enlarging cutting edge length with retention of linear dimensions.

Characteristics of a knife:

  • Total length, mm - 280

  • Length of blade, mm - 160

  • The greatest width of blade, mm - 39

  • Thickness of a butt, mm - 6

  • Length of handle, mm - 130

  • Width of handle, mm - 36

  • Thickness of handle, mm - 25

  • Hardness of blade, HRC - 52-56

  • Material of blade, steel: 50Cr14MoVa, 70Cr16MoVaSi (patent RU236957C1).

 
Еще статьи...


Страница 1 из 4